Tubing, Casing & Drill Pipes Supply

We provide a variety seamless and welded petroleum industry casing, tubing, sucker rods and drill pipes with various end connections. All of our OCTG (Oil Country Tubular Goods) products are manufactured to the API specifications.  Today, St. Louis Pipe and Supply has become a full service organization in OCTG distribution as well as pressure pipe and gas lines. Review our many pages of OCTG specifications and technical data. Our employees dedication to meeting your requirements is the benchmark that we at St. Louis Pipe and Supply strive to maintain.

St. Louis Pipe and Supply established an OCTG department to meet the growing demand for oil and gas products.  Demanding high standards from our vendors provides the best products to meet the exacting needs of the highly specialized gas and oil drilling markets. All of our manufacturers are certified by the American Petroleum Institute as meeting their rigorous compliance requirements. All tests and inspection results and product traceability data are fully documented and maintained in a computerized data base.

Some of the OCTG tubing and casing available for your company’s requirements include:

  • General drill pipes, casing pipes and tubing conforming to API standards for oil field and deep well drilling
  • API H40 tubing/pipe – general purpose pipes conforming to API specification 5CT
  • API J55 general purpose pipes for tubing applications, similar to specification K55 with lower minimum tensile strength conforming to API specification 5CT
  • API K55 general purpose pipes used primarily in casings conforming to API specification 5CT
  • API L80 tubing/pipes conforming to API specification 5CT with a controlled yield strength with hardness test requirement of 23 HRC maximum; usually used in wells with sour (H2S) environments or deep sour wells
  • API N80 or N80 Q&T (Quench and Tempered) – general purpose pipe manufactured to API specification 5CT
  • API Normalized N80 – lower-cost alternative to standard Q&T N80; pipe walls less than 0.500 inch; inspections, testing and dimensions are in accordance with API 5CT for grade N80. Charpy v-notch impact test absorbed energy results conform to API SR16 and are lower Q&T N80
  • API C90 – an API controlled yield strength grade (25.4 HRC maximum) generally used in sour condensate wells; with required extensive hardness testing, SSCC testing per NACE Standard TM-0177-Method A; minimum threshold stress required is 80% of specified minimum yield strength
  • API C955 – same strength range as T95 and U. S. Steel C95, but without a hardness requirement; generally not used in sour wells
  • API T95 – API controlled yield strength grade (25.4 HRC maximum), the same as API C95 and U. S. Steel C95; generally for use in sour condensate wells; extensive hardness testing is required including SSCC testing per NACE Standard TM-0177-Method A; minimum threshold stress required is 80% of specified minimum yield strength
  • API P110 – generally used in deep wells; this grade is not suitable for most sour condensate wells
  • API Q125 – API grade for deep well service, generally not for use in sour condensate wells; quadrant hardness testing is required (no specified hardness limits other than the variation between readings); impact testing required for each heat and/or lot; typically EMI and UT NDT inspections are required

Contact St. Louis Pipe and Supply for Reliable OCTG Pipes and Fabrication Service for Your Company